How to Install Energy-Efficient LED Outdoor Lighting?

Common Mistakes to Avoid When Installing LED Outdoor Landscape Lighting

Ready to brighten up your yard with LED outdoor landscape lighting? Great Idea!

Your home is about to look nice and welcoming because these lights have their own charm. But before you start, it’s important for you to know common mistakes to avoid. There are many people (you can, too) who make these mistakes when they learn how to install LED outdoor landscape lighting. The consequences? You may face issues later on!

This piece of writing will help you go over those mistakes so you can shine a light on your outdoor space without any trouble.

Common Mistakes to Avoid

1. Planning and Design Errors

Insufficient Planning

For the correct installation of LED landscape lighting solutions, a solid plan is required. Before you hop on putting up lights, make a detailed lighting plan. Think about the layout of your property, its existing structures, and the effects you want to achieve. This planning will make it easy for you to put the lights where they should go, making your space look its best! 

Incorrect Lighting Placement 

Incorrect lighting placement is another common mistake. The aim is not to just throw up lights anywhere. They need to be placed carefully to create the right vibe. If the lights are too close together, they’ll eventually make the area way too bright or cause glare (which isn’t pleasant). You want the right balance between visibility and ambiance. 

If you plan well and strategically place your lights, the results will be amazing. You will have the perfect benefits of energy-efficient LED outdoor lights that brighten up your space. So, take your time and plan your lighting design well before you start installing it.

2 Electrical Mistakes

Improper Wiring

Wrong wiring can be really dangerous. It can result in electrical hazards, shocks, and even damage to your lighting system. To avoid these risks, always follow the safety rules (when doing any wiring). Make sure everything is connected properly and use the right type of wires. Not sure how to wire things properly? Better to seek help from professionals. 

Overloading Circuits

Connecting too many lights in one circuit results in overloading circuits. This can cause flickering lights or even blow a fuse. To prevent this from happening, know how much power your lights need. 

When you are using LED landscape lighting solutions, make sure to check the wattage and distribute the load across different circuits. Through this, you can have bright and beautiful outdoor lighting without any electrical issues. So, always keep safety in mind when you set up your lights. 

3. Installation Errors

Incorrect Depth 

The thing with landscape lights is you have to bury their cables. Right burying depth is important for protecting them from potential damage. Don’t place your cables too close to the surface. They can get cut or damaged by things like shovels or lawn movers. Bury them at least 6 to 12 inches deep. Remember, it can change based on the soil conditions and climate. 

While clay soil holds up better, for sandy soil, you might need to go deeper. To make sure you’re doing it right, always check local guidelines. This way, your lighting will last longer, and you won’t have to worry about repairs. 

Inadequate Sealing

Moisture can be the enemy of your lighting, causing electrical issues. It’s better if you properly seal your connections and fixtures. Because if water gets in, it can cause short circuits or, worse, damage to your lights. Always use waterproof connections and sealants to keep everything safe. 

There are silicon-based sealants that are considered good choices as they work well in different weather conditions. Make sure to apply it carefully to all connections and fixtures.

Following this, one of the important tips on how to install LED outdoor landscape lighting will help you a lot and keep your lights shining bright for years to come!

4. Maintenance and Care Mistakes

Neglecting Regular Maintenance

Even if you’ve installed your outdoor landscape lighting correctly, if you don’t take proper care of it afterward, problems may arise.  Check your lights often; they can get dirty, damaged, or might stop working. To keep them shining bright, make sure you clean them regularly and keep a check for any damage. Replace bulbs when they burn out (due to any electrical failure). This simple routine will make the life of your lights last long. 

Using Incorrect Cleaning Products

Another mistake is that people use the wrong cleaning products. Some people think that harsh chemicals or abrasive materials will do a better job, but the reality is they can actually harm your fixtures. 

These are tough cleaners that can scratch or damage the lights, which can reduce their lifespan. Instead, stick to gentle cleaning methods. Use a soft cloth and mild soap to clean your lights without causing any harm.

Takeaway

Your outdoor landscape lighting definitely adds a charm to the ambiance of your beloved home. Just avoid the mistakes while you install them. With proper installation and aftercare, you make sure they shine bright and do their job well for a long time. 

If you are unsure about any aspect of the installation process, it is always best to consult with a professional. 

At Ambient Lights, we offer you led landscape lighting solutions and more. Our professional design and installation services guarantee that everything is arranged just right. 

To shop or to explore, click here.